Resourceful articles and safe work method statements to help you augment and enhance project execution.
Work Method Statement and Procedure for Shotcrete or Gunite. What is Shotcrete or Gunite or Spray concrete? Gunite is an excellent way to strengthen concrete surface and indispensable process for structural repairs. This method statement summarizes suggested method of executing works safely within any constraints. The safe work method for carrying shotcrete or gunite work.
A topographic survey is an Engineering survey to understand and analyze the ground features along the proposed alignment. Survey activities include road alignment, fixing the center line of road, providing permanent grid lines and benchmarks as per the applicable standards. Fix all cardinal points like horizontal intersection points, centre points and transit points etc.
7 simple steps, when followed in sequence, will definitely improve the process, reduce timelines and brings transparency to the finalization process of right vendors. A detailed Standard Operating Procedure along with check lists shall be in place to make the vendor finalization a more process oriented.
The wide variety of terrace waterproofing methods often makes it difficult to select a right waterproofing system. Find out various available methods of Waterproofing including their procedure and advantages. Some of the deciding factors are insulation requirements; availability of proper slope; available contractors preference; condition of a structure.
Work Method Statement and Procedure for cuplock scaffolding. Cuplock scaffolding is among the most well-known scaffolding systems. This method statement describes the procedure and resources required to do the work. Use any other resources and methods not referred in this method statement to suit the project requirement. This method statement summarizes suggested method of executing works safely within any constraints.
Earthing or grounding purpose is to connect electrical conductors to the earth. It carries the current to the ground. Why do we need earthing? Protect personnel against electrical hazards like an electric shock. Plate Earthing: A copper plate or galvanized plate is buried in an earth pit below ground level. The plate electrode connects the electrical conductors to the earth. Pipe Earthing: A galvanized steel perforated pipe inside the ground connects the electrical conductors to the earth.
Rainwater harvesting is the activity of collecting rainwater and storing it for later use or recharge to the groundwater. This method statement describes the procedure and resources required to do the work. The procedure includes delivery system, recharge bore and recharge pit. Know the safe work method and detailed procedure along with diagram for rainwater harvesting.
Many constructions fatal accidents occurred during excavation. Therefore it’s vital to prepare a safe work method statement for carrying any excavation activity. This safe work method statement for excavation presents the procedure, applicable standards, precautions for safe excavation, Common excavation safety hazards, Excavation safety checklist.
E-auctions are negotiation methods involving competitive bidding which are conducted over the Internet. E-auctions for business is now gaining swift popularity. The competitive bidding results in a fantastic deal which turned out to beneficial for businesses. The good thing about e-auctioning is the size of your organization is not an issue of concern. Lots of companies in future will use e-auction as part of their business procurement strategy.
Diaphragm wall is a technique used to construct reinforced concrete walls in the ground after deep trench excavation. The walls act as cut-off wall or serve as a structural member. The trench is filled with bentonite slurry continuously circulated at all times. The construction stages are Guide Walls, supporting slurry, excavation, stop ends fixing, lowering of reinforcement cage, concreting and Stop Ends removal.
Microtunneling is a technique used to make small diameter tunnels to install pipes by pipe jacking method. Due to the small tunnel diameters, the tunnel machine is controlled remotely from the surface. The microtunneling procedure is widely used for utility pipes laying in congested areas, highway, river and railway crossings. Pipes can be laid with microtunneling without disturbing the traffic flow and the construction is possible in all weather conditions. Pipes can also be laid with an alignment that is curvature.